Epoxy-coated cast valve for water
EB 1.75
Application
- Liquids up to 130 °C
Standard
- Connection: thread G 1-2 / flange DN 50-400
- Operating pressure: 0,2-40 bar
- Flow rate bleeding/venting: up to 5100/38170 Nm3/h
- Body made of spheroidal cast iron GJS 450-10
- with epoxy coating in blue RAL 5005, thickness min. 250 μm
- Trim materials: stainless steel
- Float in solid PP
- Degassing bend made of polypropylene PP (DN 50 – 150) or SS (DN 200 – 250)
- Soft seal NBR
- Minimum working pressure: 0.2 bar
Options:
- Without release during working conditions
- Non-slam closing mechanism
- Release interlock system
- Elastomers: EPDM, FKM, silicone
- Outlet with degassing bend
- Pressure surge attenuation by anti-shock system
- Special design on request
Start-up and continuous valve for waste water
EB 1.85
Application
- Liquids up to 130 °C
Standard
- Connection: thread G 2 / flange DN 50-200
- Operating pressure: 0,2-16 bar
- Flow rate bleeding/venting: up to 4100/4200 Nm3/h
- Body made of spheroidal cast iron GJS 450-10
- with epoxy coating in blue RAL 5005, thickness min. 250 μm
- Trim materials: stainless steel
- Float in solid PP
- Degassing bend made of polypropylene PP
- Soft seal NBR
- Minimum working pressure: 0.2 bar
Options:
- Without release during working conditions
- Non-slam closing mechanism
- Release interlock system
- Elastomers: EPDM, FKM, silicone
- Outlet with degassing bend
- Pressure surge attenuation by anti-shock system
- Special design on request